Benefits:
- Find surface defects with AC current; switch cable connection to half wave DC (HWDC) for near-surface flaws
- Locate defects in any direction using prods, central conductor, coil (wrap part with 3-5 turns of cable)
- Infinitely variable current control
- Demagnetize parts in AC mode by slowly turning the current dial to zero
- Built-in automatic-reset circuit breaker
- May be used as the main power source for the Mag Kit modular bench inspection system
- Comes standard with 15 ft / 4.5 m remote control cable
Product Name Specifications Part Number
- P-70
- Length: 17.5″ (44.5 cm)
- Width: 9″ (22.9 cm)
- Height: 8″ (20.3 cm)
- Maximum Output*: 750 amps, AC or HWDC
- Available Voltages: 115,230, 50 or 60 Hertz; single phase power
- Line Current: 26 amps @ 115 VAC; 13 amps @ 230 VAC
- Maximum Duty Cycle: 2 minutes ON, 2 minutes OFF
- Unit Weight: 35 lbs (15.9 kg)
- Note: Current ratings are based on the use of two 15-foot length 4/0 cable, 4/0 cable not included, must be purchased separately.
- 115V: 628822
- 230V: 628826
- P-1500
- Length: 22″ (55.9 cm)
- Width: 9.5″ (24.1 cm)
- Height: 9.5″ (24.1 cm)
- Maximum Output: 1500 amps, AC or HWDC
- Available Voltages: 230,460, 50 or 60 Hertz; single phase power
- Line Current: 42 amps @ 230 VAC; 21 amps @ 460 VAC
- Maximum Duty Cycle: 2 minutes ON, 2 minutes OFF
- Unit Weight: 93 lbs (42.2 kg)
- Note: Current ratings are based on the use of two 15-foot length 4/0 cable, 4/0 cable not included, must be purchased separately.
- 230V: 628824
- 460V: 628825
Retro-Fit Kit
- Converts Either-End connectors on P-Units to Lug terminals
- Includes three (3) Lug terminals and all required hardware
- Includes installation guide
- For either P-70 or P-1500: 628882
Recommended Accessories:
- 626350-180: 15 ft/ 4.6 m Lugs at both ends
- 628832: Lug to Quick Connect Adapter Kit
- 628833-180: 15 ft / 4.6 m 4/0 cable assembly with 628828 QC-F and 628829 QC-M quick connectors on each end
