RSDMAG

To convert the RSD MAG from a portable hardness tester to regular bench top instrument, it can be combined with two different size of stand support, 670H or 460L. This system fully conforms to hardness testing standards and allows testing in laboratory on small pieces and prepared samples without the need uf buying another hardness tester. Hardness measurements will result fast and easy as an AFFRI bench tester including the sample clamping system and the auto compensation of deflection thank’s to indenter and clamping hood vertical stroke.
! Measurements will be fast and easy as for an AFFRI bench hardness tester including the clamping system and the auto-compensation of deflections.
Categories: ,
Thanks to the portable hardness tester RSDMAG with magnetic clamping base it is possible to perform hardness tests on very bulky samples directly in the production department. Try our portable hardness tester on: Oil and Gas pipes (also on-site), valves, tubes and steel bars, flat rolled steel plates, forged steel rings, rails, train wheels, drilling tools, walls and roofs.
– Safe clamping on any sample! From round to flat, with self-alignment of the indenter with the measurement axis
– Operative at 360°! Completely uninfluenced by direction so that it is operative even upside down
– Very fast, even 3″ for one hardness test! (adjustable dwell time)
HARSHNESS RESISTANT
– Portable hardness tester RSDMAG can be used under difficult environmental conditions or in dirty and dusty places. The measurements are not affected by humidity and the tester can be used in cloudy days and light rain.
– Water-proof trolley. Transport case resistant to chemicals, humidity and dust. Resistant to harshest temperatures (-33°C / 90°C). Sealing O-Ring and self-oiling free running wheels. Telescopic – handle with safe lock system. Three lift handles and four closing clips.
Standards: EN-ISO 6506-2 / EN-ISO 6507-2 / EN-ISO 6508-2 / ASTM E-18 / ASTM E-10 / ASTM E-103 / ASTM E-110 / ASTM E-384
Indenter and clamping-hood stroke: 0/50 mm
Preload: RSDMAG D2: 98.1 N (10 kgf)
RSDMAG D4: 29.4 N (3 kgf)
Force range: RSDMAG D2:
Rockwell: 588.4 – 980.7 – 1471 N (60 – 100 – 150 kgf)
Brinell: 98.07 – 612.9 – 1226 – 1839 N – On request 2452 N (10 – 62.5 – 125 – 187.5 kgf – On request 250 kgf)
Vickers (Indentation only): 98.07 – 980.7 N (10 – 100 kgf)
RSDMAG D4:
Superficial Rockwell: 147.1 – 294.2 – 441.3 N (15 – 30 – 45 kgf)
Brinell: 153.2 – 294.2 – 306.5 N (15.6 – 30 – 31.2 kgf)
Vickers (Indentation only): 29.42 – 294.2 N (3 – 30)
Feasible tests: RSDMAG D2:
Rockwell: HRC – HRA – HRD – HRB – HRF – HRG – HRL – HRM – HRR
Brinell HBTW direct: 1/10 – 2.5/62.5 – 2.5/187.5 – 5/125
Vickers (Indentation only): HV10 – HV100
RSDMAG D4:
Superficial Rockwell: HRN – HRT
Brinell HBTW direct: 1/30 – 2.5/15.6 – 2.5/31.5
Vickers (Indentation only): HV3 – HV30
Load accuracy: Better than 0.5%