• Fully automated, remote-controlled systems
• Portable, battery-operated for onsite flexibility
• Suitable for multiple asset types, from 70mm (2.75in) diameter pipes to flat plates
• Fast scanning speeds—up to 250mm/sec (9.84in/sec) scan speed and up to 762mm/sec (0-30in/sec) index speed
• Lightweight—Magnetic crawler weighs just 7.7kg (17lb)
FERROUS INSPECTION SOLUTION
Crawler Weight: 7.7kg (17lb)
Crawler Dimensions: Height: 12.5cm (4.9in)
Height w/o Handles: 8.1cm (3.2in)
Width: 28.2cm (11.1in)
Depth: 22.6cm (9in)
Right Drive Module: Weight 4.2kg (9.3lb)
Right Drive Module Dimensions: Height: 12.5cm (4.9in)
Height w/o Handles: 8.1cm (3.2in)
Width: 13.4cm (5.3in)
Depth: 22.6cm (9in)
Circumferential Pipe Range: 7cm (2.75in) OD to flat
Longitudinal Pipe Range: 30.5cm (12in) OD to flat
Internal, Circumferential Pipe Range: 61cm (24in) to OD
Nozzle Size Range 7cm (2.75in)
Radial Clearance w/o Handles: 7cm (2.75in) pipes under 20cm (8in)
8.15cm (3.2in) pipes over 20cm (8in)
Vertical Nozzle Clearance: 23cm (9in)
Idler Encoder (Right Module): 13.78 counts/mm (22162.8 counts/in)
Motor Encoder (Left Module): 872.5 counts/mm (22162.8 counts/in)
Y-Axis Encoder (Nozzle Application): 161.3 counts/mm (4096 counts/in)
Skew Axis Encoder (Nozzle Application): 2.84 counts/degrees
Driving Speed Variable: 0-25cm/sec (0-10in/sec)
Crawler’s Vertical Payload: 10kg (22lb)*
Power Requirements: 100-240VAC, 50/60Hz, 3.5 Amps
Inspection Surface: Ferrous
Maximum Backpack Payload: 1.36kg (3lb)
Regulations: CE: European Union CE Declaration – Compliance with essential requirements and provisions of European Union
directives
FCC: Compliance with Part 15 of FCC rules
Industry Canada: CAN ICES-3 (A)/NMB-3(A) – This class A digital apparatus complies with Canadian ICES-003
Operating Environment: -20°C (-4°F) to 50°C (122°F)
Max. Inspection Surface: Temperature 150°C (302°F)**
Environmental Sealing: Dust-tight, watertight***
Notes: * Performance may vary with the surface type. Heavy payloads may require reduced speeds.
** The automated crawler medium temperature add-on kit is required when the inspection surface temperature
measures between 50°C (122°F) and 150°C (302°F).
*** Not submersible.
ATTACHMENTS
General: Raster Arm Module Encoder: 240.2 counts/mm (6101 counts/in)
Raster Arm Module Speed: 0 – 76.2 cm/sec (0 – 30 in/sec)
Stroke: 300mm Raster Arm: 300mm (11.8in)
600mm Raster Arm: 600mm (23.6in)
900mm Raster Arm: 900mm (35.4 in)
11600mm Raster Arm: 11600mm (45.7in)
Weight: 300mm Raster Arm (12in): 2.4kg (5.3lb)
600mm Raster Arm (24in): 3.33kg (7.2lb)
900mm Raster Arm (35in): 4kg (8.7lb)
1160mm Raster Arm (45in): 4.6kg (10.2lb)
ACCESSORIES
Tracker: Automatically follow a weld profile
Motorized Raster Arm: Two-axis, automated, corrosion scanning
Backpack: Carry peripherals on the crawler
Pre-Amp Bracket: Mount pre-amps to the crawler
Motorized: Couplant Pump Consistent couplant supply
Optical Guide: Guide crawler along welds
Camera Mount: Monitor scanner operation
